Boating Basics Online is reader-supported. When you buy via our links, we may earn a commission at no cost to you. Learn more

The Best Jon Boat Seats (Swivel, Folding, Leaning, Deck Seat)

best jon boat seats

Jon boats are a practical choice for a boat, especially for fishing. But how do you take advantage of these characteristics when choosing a good Jon boat seat? How do you know which ones are the best Jon boat seats?

Since these boats focus on practicality and sport a minimalist design, we’ll look at the seats on our list with some specific characteristics in mind. We’ll be focusing on three key points for Jon boat seats.

  • Marine-proofing and Durability: A good boat seat is built for use on the water. Rust, moisture, UV; all these things that can be found in a marine environment should be no problem for good seats. Anodized aluminum is excellent, and injection-molded plastic is a good choice for a strong plastic seat frame. Both possess enough durability. Compression foam is a must for Jon boat seat cushions so that they’ll last.
  • Convenience: Among the characteristics that Jon boats possess, the degree of convenience they provide is one I like most. Easy to install, easy to clean, stain-resistant, lightweight, easy to transport; these are just a few of the characteristics that would be very nice to have in Jon boat seats.
  • Function: Jon boats are an image of practicality, and it is appropriate that we choose seats that allow Jon boats to play to their strength. Swivel seats and removable seats are good functional choices depending on your needs. It’s a good idea to heavily consider the function your seats will serve when choosing which one to get.

Keep reading and find out what you need to know about Jon boat seats. We’ve covered a list of some of the right Jon boat seat ideas, including a Buying Guide further below. Read on to simplify your boating life.

Best Jon Boat Seat Reviews 

1. Wise 8WD139 Series Molded Fishing Boat Seat

This boat seat by Wise is a folding seat that has a plastic seat frame. Notably, such a design is high impact, making it able to withstand use in marine conditions. And the seat’s vinyl surface is mildew, and UV treated, protecting the design from hazards when out in the sea.

The seat itself is wide, at a little over 20 inches wide and 18.5 inches deep it easily accommodates people of different sizes.

This Jon boat seat mounts to the standard BIA bolt pedestal system, making it compatible with many pedestal bases or even Jon boat swivel seat mounts. It comes with fasteners which makes it easy to set up and install.

This seat also comes with straps to keep the seat locked in while folded; this is very handy when transporting the boat to avoid unnecessary rocking that may end up causing damage to the seat or the boat itself.

The seat has padding for both the backrest. Yet, I am somewhat disappointed in its rather thin padding, which is much smaller at just 15 inches deep. It does offer ample back support, but a bit more padding would have made it a lot better.
What We Like
  • The seat is marine-proof with its UV resistant marine-grade vinyl material
  • High impact injection-molded plastic as its frame gives it enough durability
  • This boat seat works with many install bases due to its standard bolt system
  • Its 20-inch wide and 18.5-inch deeper seat offer good seat support
What We Don’t Like
  • The seat padding is much smaller compared to the seat itself and is not very thick
This seat by Wise is a good solid choice for a boat seat. Its high-impact plastic frame and marine-proof materials offer a good option that does not break the bank.

2. Attwood 98391GNMX Padded Boat Seat

The Attwood padded boat seat is a fold-down boat seat with a bit of a recline. Among camo Jon boat seats, it features a detailed camo pattern that offers a nice decorative touch. As it conforms to American Boating and Yacht Council standards, the seat guarantees a certain degree of reliability and quality that cannot be understated.

It has a molded plastic frame and uses a hinged bracket for its folding design. This Jon boat seat is light and compact, weighing at just 7 lbs, making it easy to store and transport.

The padding on the seat and backrest are thick, providing extra comfort. Although, I am concerned about its durability as it is not made of compression foam.

As for installation, this boat seat is easy to work with as it uses a standard bolting system for set-up with standard install bases. It works with 4 threaded bolts that insert into the plastic t-nut found at the seat base, making installation simple.

This boat seat also comes with a strap for holding down the seat in a folded position. At 20-inch wide and 17 inches deep, it’s large enough to support a seated position for hours comfortably.
What We Like
  • Comfortable dimensions at 20 inches wide and 17 inches deep
  • Lightweight and compact for easy storing and transporting
  • Beautiful and vibrant camo Jon boat seats design
  • Thick seat padding for extra comfort
  • Adheres to American Boating and Yacht Council standards
What We Don’t Like
  • It uses a plastic t-nut and non-compression foam, making it less durable
With its strong plastic frame and ease of installation, this Attwood boat seat makes for a good choice for a boat seat. Its vibrant camo design and slight recline add a bit more value, making this a good choice for a Jon boat seat or even a seat for a larger vessel.

3. Wise Economy Low Back Seat

The Wise economy low back seat is a seat for Jon boats that offers a high degree of comfort among folding Jon boat seats. This low-back boat seat by Wise is a comfortable chair as low-back boat seats go.

The embossed vinyl pattern gives it a nice premium-looking finish. Thus, it can be among the beautiful jon boat accessories that we look for.

The boat seat itself has a plastic frame that is injection-molded and high-impact for added durability. Its hinges, for its fold-down boat seat function, are made of aluminum. The padding is made of compression foam and 28 oz marine-grade vinyl. Thus, the Jon boat chair is both UV and mildew treated for additional marine-proofing.

This Jon boat chair doesn’t look like it gives you much space with a width of 16 inches and a depth of 14 inches. Yet, since the cushion covers the entire area, this is undoubtedly a comfortable seat for boat owners while out in the sea.

Due to its use of a standard BIA 4-bolt pedestal system, it’s easy to work with and install. Included in the package are the mounting fasteners needed for installation, making the process quick and easy.
What We Like
  • The embossed vinyl pattern gives it a nice premium-looking finish
  • Aplastic frame injection-molded and high-impact for added durability
  • UV and mildew treated for marine-proofing
  • A 16-inch wide and 14-inch deep seat for comfort
  • The standard bolting system makes it easy to use with any install base
  • Very comfortable as far as fold-down boat seats go
What We Don’t Like
  • Not a compact Jon boat chair
Sporting a good number of marine-proofing features in addition to its high degree of comfort, it still makes for a good choice for Jon boat seats with its generous high compression foam padding and its ease of use.

4. Millennium Marine B100 Boat Seat

The B100 Boat Seat by Millenium Marine is a folding seat that capitalizes on a few features that many other boat seats are seemingly unable to offer. Compared to other folding boat seats, this one folds flat, allowing for more efficient space-saving and even easier transport.

Like other Millenium marine products, this boat seat features breathable fabric that does not retain water, making it quick to dry. This material is also UV, mold, mildew-resistant, and durable despite being thin. The stability that this boat seat offers is certainly hard to match especially considering how thin and lightweight the fabric is.

Surprisingly, the breathable fabric also acts as an adequate cushion that makes for rather comfortable boat seats.

Made of aluminum completely, the seat frame provides ample back support that allows up to 400 lbs in weight. It’s also easy to use with any standard install base, including swivels, and can accommodate optional armrests, though said armrests are not included in the seat package.

The seat itself is 20 inches wide and 17 inches deep. While it is not too large, it is enough to accommodate larger people. The higher backrest also offers good lumbar support even though it is made of soft material.

It may be difficult for some people to believe that the breathable material can accommodate a seated person’s weight, but trying it for ourselvé will dispel people’s reservations quickly.
What We Like
  • Breathable fabric drains water quickly and dries very quickly
  • Marine-proof and durable due to its aluminum frame
  • The 20-inch wide seat is comfortable enough even for larger people
  • Folds flat and is easy to install, accommodates optional armrests
What We Don’t Like
  • It is easy to be skeptical of the breathable material’s durability
This Jon boat seat by Millennium Marine is an excellent and durable boat seat that looks like it can weather harsh weather conditions and wear from frequent use with ease. Still, this is a Jon boat seat that boasts excellent value

5. Shoreline Marine Jon Boat Seat

This line of Jon boat seats by Shoreline Marine is the sole bucket seat on our list. Its simple design lends to its practical use on a Jon boat. In truth, this sturdy seat can offer ample seating for any activity of boat owners.

It is compatible for use and installation with swivel and pedestal systems. It can also be effective among sliding Jon boat seats with the use of a boat seat slider bracket. The resulting installation is very stable and allows it to fulfill such versatile roles.

At 17 inches wide, this bucket seat provides a good amount of seating and back support that is also comfortable due to the space it provides. Since it is made of a single mold of vinyl, it is also very durable with no moving parts. Any accidental bump is of no concern at all.

The fact that its material is also stain-resistant is a big plus. Hunting can be a messy affair, and this seat can fill the role with ease, which not many other seats for Fon boats could fill.

It also has a drain hole at the bottom of the seat, and water drains right off. Rain or shine, this Jon boat seat works just fine.

However, this one does not come with extra thick padding that comfortably supports your back for hours on end.
What We Like
  • 17-inch width provides a lot of space and seating support
  • Durable and stain-resistant vinyl allows for use in many activities
  • Works well with swivel, pedestal, or even sliding mounting bracket
  • Drains water right off and does not hold moisture
What We Don’t Like
  • Not a thick chair for Jon boater
The bottom line with this boat seat by Shoreline Marine, it is a bucket seat that works. It does its job well and doesn’t bother with anything extra. If you think about it, this rugged form and feature fit a Jon boat very well, and that’s all there is to it.

6. Leader Accessories New Plastic Shell Folding Boat Seat

This Leader Accessories folding boat seat is a decent offering. In truth, their New Plastic Shell Folding Seat is a folding piece that provides the right amount of comfort and durability that we need for a boat chair.

It is both water-resistant and easy to clean, making it a good choice for many boating activities where the risk of getting rained on or wet is high.

Its compression foam padding offers excellent comfort and retains its form even after use for a few hours. With a 20.5-inch wide and 18-inch deep seat, it provides enough space and comfort that sitting for long periods is not distracting enough to mess with your concentration.

It has a 14.5-inch high backrest with a slight recline. Unfortunately, the backrest gets creaky when leaned on, and I would not lean on it completely. The frame itself seems durable enough, made of heavy-duty molded plastic, it seems sturdy enough for marine use.

Since it uses a standard 5 x 5 bolting pattern, it is also compatible with most install bases and is easy to set up and install. Mounting hardware is included with this boat seat package.
What We Like
  • Water-resistant and easy to clean
  • The 20.5-inch wide and 18-inch deep seat provides enough space and support
  • Made with heavy-duty molded plastic and compression foam for added durability
  • Easy to install and works with most install bases due to its 5×5 bolting pattern
What We Don’t Like
  • The backrest is somewhat creaky and unstable when leaned on
It offers a good combination of durability and affordability that works. Its water-resistant materials bring something to the table despite their average set of offerings that make them more than serviceable as good Jon boat chairs.

7. Wise Deluxe High-Back Seat

This time we’re taking a look at the Wise Deluxe High-Back Seat. In contrast to the low-back seat earlier, this Jon boat seat offers a 21-inch high backrest that offers nice and ample support all the way up to the back of the head.

It retains the good qualities of the low-back boat seats offering by Wise. 28oz high compression foam padding for both seats and backrest retains form and softness even when used for long periods. Aluminum folding hinge and high impact plastic injection-molded seat frame, both of which are marine-proof.

With a seat depth of 14 inches and 17-inch width, this is still a comfortable seat that provides ample seat support.

It also has marine vinyl that is UV-treated and mildew resistant to keep it usable for a long time. Thus, we can embark on a journey to the sea without worrying that this boat seat is subjected to damage too soon.

Unfortunately, it also shares the low-back seat’s shortcoming with its seemingly unstable backrest that seems to creak and give way somewhat when leaning back. Other than that, it is still a good boat seat.

It also installs easily with its use of a standard mounting system compatible with most swivel or pedestal mountings. The necessary screws for installation are included with this boat seat.
What We Like
  • 28oz high compressions foam for both seat and 21-inch high backrest for comfort
  • Made of durable materials; high-impact-plastic frame, and aluminum hinges
  • UV treated and mildew-resistant marine-grade vinyl for marine use
  • Easy installation with standard mounting system and included screws
What We Don’t Like
  • The backrest creaks and seems like it will give way if leaned on heavily
This high-back seat still offers a solid Jon boat seats solution despite its seemingly glaring flaw. To be fair, it doesn’t give way, and until it does it looks like a solid choice that performs well under marine conditions.

8. NORTHCAPTAIN T1 Deluxe Low Back Folding Boat Seat

This low-back folding seat from NORTHCAPTAIN is a gorgeous-looking boat seat with a premium finish. Its folding design allows for an on-demand space-saving measure and comes with a strap for holding it in the folded position.

Due to its injection-molded polypropylene frame and aluminum hinges, the seat can withstand the harsh marine conditions of boating and fishing. However, it is also comfortable due to its 28oz compression foam which is firm and holds its form well even after months of use.

While it is built to last under marine conditions, its sole shortcoming is that it is not entirely waterproof. As a result of having such thick cushions, a wet seat stays wet longer. It does resist water somewhat, so it won’t soak all the water in, taking a long time to dry can be inconvenient at times.

As for installation, it uses the standard 4-bolt mounting system and can be used with any pedestal or swivel compatible with such mounting. This makes it very easy to use and install this boat seat.

While it uses plastic thread inserts that I was initially concerned with, it does seem to hold up well. The boat seat looks to be of good quality overall.
What We Like
  • Firm and comfortable due to its high compression foam padding
  • Its use of the standard 4-bolt mounting makes it easy to use and set up
  • Very durable with its injection-molded polypropylene frame and aluminum hinge
  • Suited for marine use with its multitude of marine-proofing features
What We Don’t Like
  • Not completely waterproof and takes a long time to dry due to its thick cushion
This low-back folding boat seat from NORTHCAPTAIN looks and feels high quality. With durable and quality materials that stand their ground against long-term wear, this Jon boat seat solution is a quality marine product that is hard to ignore.

9. Tempress All Weather High Back Seat

The All-Weather High Back Seat from Tempress is a very comfortable-looking Jon boat seat. At first glance, I thought it was soft and had concerns about how durable it could be, considering how soft it looked. I was wrong by a mile.

This boat seat sports a 30 oz marine-grade vinyl with 4-inch high-density foam inserts. The vinyl could be replaced with nylon depending on which design you pick, but the quality stays the same.

The padding is firm, and it stays firm. While it is still comfortable, the concern about durability and staying in form have faded from my mind. Sitting on it, you won’t feel the frame through the padding at all.

The boat seat itself is American Boating and Yacht Council standards-compliant. Its injection-molded frame is impact-tested and is sturdy. The backrest is held to the base by a stainless steel pin, making every part of this boat seat marine-worthy.

My favorite detail with this boat seat is that the padding is removable, making it very easy to clean. They slip onto the frame, and while removable, they seem to have no trouble staying on during use.

The boat seat is easy to install with any standard mounting and comes with 20 t-nuts for easy installation. The fact that it does not come with a strap for holding it down when folded is the only obvious flaw, and that’s something anyone can live with.
What We Like
  • 30 oz marine vinyl with high-density foam, both durable and comfortable
  • Removable padding allows for easy and thorough cleaning
  • Easy to install with standard mounting, comes with t-nuts
  • American Boating and Yacht Council standards-compliant boat seat
  • Easily withstands marine conditions
What We Don’t Like
  • No strap for holding it down when folded
This Tempress boat seat is an excellent seat for any boating condition or activity. You can’t go wrong with this seat, and it would not be easy to find a good reason not to go with it.

10. Wise Pro Casting Deck Seat

The sole deck seat on our list, this Jon boat seat by Wise offers a simple but effective product. At first glance, it looks like a solid and stable seat. It also has a nice and quality-looking finish to it.

This seat is recommended for use on either a pedestal or a swivel base, though I wouldn’t think it strange to put it on a sliding base. Anything that provides a stable foundation would do, though having it right on the deck feels right and looks like it would work well as boat seats for aluminum boats.

Being 15-inch wide and 11-inch deep, it seats very well with no rests on taking up space. The firm high compression foam padding provides extra comfort that comes in handy on long casts, and it seems to hold its form even after long periods of use. The injection-molded frame made of plastic gives it added durability.

Besides, the 26 oz marine-grade vinyl provides appropriate marine-proofing that keeps it usable in harsh weather conditions. Its embossed vinyl finish lends it a nice elegant feel that almost seems wasted when soiled, but it cleans pretty easily; that’s not really a problem.

Installation is also a breeze as it mounts to all BIA standard 4-bolt mounting systems. It’s an effective space-saving boat seat that looks good and is comfortable to use.
What We Like
  • Ideal for install on a pedestal, a swivel base, a sliding base, etc
  • The 15-inch wide and 11-inch deep seat is comfortable
  • firm high compression foam padding provides extra comfort
  • Marine vinyl and high impact plastic frame makes it worthy of marine-use
  • Simple embossed vinyl finish design that is easy to use and install
What We Don’t Like
  • No fancy features for additional comfort or utility
The bottom line is that this deck seat by Wise is a high-quality Jon boat seat that is simple in design and durable.

11. Leader Accessories New Low Back Folding Boat Seat

This low-back folding seat is the second and last of the camo Jon boat seats on our list, although it is available in other designs. The pattern design is detailed and well made, lending to it a different atmosphere, not that it matters much on a Jon boat.

At 16-inches wide and 14 inches deep, it provides decent seating space and support. The cushions are marketed to contour to the body, and it does. It is comfortable, almost to a point where it feels inappropriate for fishing, but that’s just my opinion.

It has both an injection-molded frame made of plastic and anodized aluminum hinges that ensure its durability in marine conditions. Also, it utilizes marine-grade vinyl that is UV treated. When folded, it has a strap to hold it in position to keep it from inadvertently unfolding.

The standard 5×5 mounting bolt pattern is used for it, and mounting bolts are included. This ensures that it will be easy to use this seat with any mounting platform and makes installation effortless.

Unfortunately, these cushions are not padded with compression foam, making it almost sure they will turn flat after a while. However, it is very comfortable, and a compression foam would have hindered that, so maybe that’s what it is supposed to be.
What We Like
  • Serve as comfortable seats that contour to the body
  • The use of standard 5×5 mounting makes it compatible with most mountings
  • The 16-inch wide and 14-inch deep seats provide enough space and support
  • Additional durability from the plastic frame that is injection-molded
What We Don’t Like
  • Seat padding is not made of compression foam, limiting its durability
This is a comfortable Jon boat seat from Leader Accessories that comes up short in just one area, using a non-compression foam.

12. NORTHCAPTAIN S1 Deluxe High Back Folding Boat Seat

NORTHCAPTAIN provides quality boat seats, and this high back folding seat is no exception. What immediately catches the eye is its premium-looking finish. The build quality looks good, but that’s not all that’s good once you actually try it out.

The compression foam padding is stable and secure but comfortable enough and not too stiff to require a long break-in period. The 28 oz. marine-grade vinyl has a nice feel to it and secures the foam well. It doesn’t look like it will tear from the sides from fastening.

With a width of 16 inches and a depth of 15.4 inches, the space allotted is appropriate for most. It is easily capable of supporting 250 lbs, and while the backrest flexes somewhat when leaned on, it still ends up stable and secure.

As a boat seat, it is made for a marine environment as expected. Its plastic frame is injection-molded and is made from UV-resistant polypropylene which lends it the necessary durability. Stainless steel screws are included for installation, and all materials seem marine-proof.

The boat seat installs easily on any standard 4-bolt swivel or pedestal mounting. It also comes with a strap to secure it in position while folded.

The flexing backrest may initially be concerning, but the high degree of comfortability paired with its quality finish and durability make it easy to forget your worries and focus on the activity at hand, whether boating, fishing, or just lounging.
What We Like
  • Comfortable seating with 16-inch width and 15-inch depth
  • Has marine-grade vinyl and polypropylene plastic frame for additional durability
  • Sports a premium-looking and neat finish
  • Uses standard 4-bolt mounting makes it easy for installing boat seats
  • Ideal for boating, fishing, or just lounging
What We Don’t Like
  • The backrest flexes a bit when leaned on
All in all, this NORTHCAPTAIN high-back folding boat seat looks and feels high-quality, offering enough comfort for most boat owners.

13. Leader Accessories New Low Back Folding Boat Seat

This Leader accessories low back folding seat is a solid and study Jon boat seat. The cushions are thick, making for comfortable and secure seating. Available in different designs, this boat seat looks neat and well-made.

What catches the eye is the thick cushion that comes with the seat. At 16 inches in width and 15 inches in depth, the whole seat is padded with compression foam. The backrest while low-back provides sufficient back support. The notable thing, this cushion itself is firm yet comfortable.

Its folding design allows for space-saving when necessary and has a strap for keeping it in place. Even the strap looks to be of good quality.

Made of an injection-plastic frame secured by aluminum hinges, this boat seat is durable enough for marine use. Marine vinyl protects the compression foam well and holds its shape and firmness well even after a few hours of use which is essential for fishing.

Installation is simple and holds well with standard 4-bolt mounting, and stainless steel screws are packed along for its use. The seat base, while plastic, holds well after installing seats. But some DIY Jon boat seats knowledge is necessary because of the slightly misaligned bracket.
What We Like
  • Injection-molded plastic frame and aluminum hinge make for extra durability
  • The 16-inch width and 15-inch depth coupled with thick padding is comfortable
  • The use of standard 4-bolt mounting makes it easy to install
  • Compression foam is firm and secure but still provides comfortable seating
What We Don’t Like
  • Mounting bracket alignment is slightly off and needs adjustment
Overall, this Jon boat seat offers excellent value in its comfortability, marine-use durability, and ease of use. While the slightly off mounting alignment is a flaw, it is easily fixable and should not detract from the excellent value that this boat seat touts.

14. Millennium Marine B300 Palma Horse Seat

This B300 Palma Horse seat by Millennium Marine is more of a leaning post and certainly makes for one of the more interesting seats to make our list. It is shorter than a traditional lean post at 21 inches long, but it is anything but traditional.

One of its standout characteristics is that it is sturdy. Having aluminum frames, this boat seat is highly durable. Its B300 fabric is a breathable material that does not retain water, making it very easy to dry. It certainly looks like it’s built to last a long time.

Since it uses breathable fabric, it also makes for comfortable seating that allows air to circulate. Since fishing requires long hours of waiting, this breathability affords users the necessary comfort to wait out long periods.

It is built for marine use and comes with all the necessary points; UV-resistant, moisture resistant, mold and mildew resistant, rust-proof. It is capable of supporting up to 400 lbs, and this durability allows it to be used in a variety of ways; sitting or leaning.

In addition to its incredible versatility, its extremely durable and stable frame makes for a product that stands out as long as we don’t mind not having a backrest. For some people, the lack of a backrest can be an inconvenience.
What We Like
  • Excellent marine-proofing with its aluminum frame
  • Breathable and water-repellent B300 fabric
  • The 21-inch long seat provides excellent and stable leaning and back support
  • UV-resistant, moisture resistant, mold and mildew resistant, rust-proof
  • 400 lbs capacity and sturdy frame allows for a lot of versatility in its use
What We Don’t Like
  • Has no backrest and would be considered an uncomfortable seat by some
The Millenium Marine B300 Palma Horse Seat is one of the best Jon boat seat that offers different uses such as a Jon boat bench seat.

What To Know Before Buying Jon Boat Seats

flat-bottom-boat-seats

Types of Jon Boat Seats

There are many different kinds of boat seats for Jon boats. However, certain seats, such as an aluminum boat bench seat or lounge seat, are not practical to install on Jon boats. Here we’ll take a brief look at some of the common types of seats that are commonly found on Jon boats.

  • Swivel Seat

Jon boat swivel seats are just as you would imagine from the name, a seat that swivels much like a standard office chair. The core function of a swivel seat for Jon boat is to allow you easy access to any side of the boat, and any angle that may be helpful during fishing.

Pros:

  • They provide access to all angles and sides of the boat while seated
  • Easy to install most seats to a swivel base

Cons

  • They may be shaky and noisy
  • Bucket Seat

These seats are usually made of plastic material and are contoured to fit just one person. On the other hand, it provides good and comfortable back support. Since they are made to seat just one person, they are also compact in design and do not take up much space.

Pros

  • A compact seat that does not take up much space
  • Usually made of marine-proof and durable material

Cons

  • Can seat only one person
  • Folding Seat

These seats always have a backrest, some high and some low, making them comfortable to sit in. Their folding design allows for a certain degree of space-saving when necessary.

Pros

  • Have comfortable padding or cushions for both seats and backrest
  • Sport a space-saving folding design

Cons

  • Less stable backrest due to the folding hinge
  • Leaning Post

These “seats” are very stable and versatile. Some have backrests, and some do not, but they can usually be used in various ways, and it is this multifunctional utility that makes them an excellent choice for a Jon boat seat.

Pros

  • Useful for many situations and very versatile
  • Provides stable support for fishing and other activities

Cons

  • Can be considered uncomfortable compared to other seats
  • Deck Seat

Flat bottom boat seats without a lot of features for use on the deck of a boat. It is simple and functional, usually without a backrest. Make for good aluminum boat seats or row boat seats.

Pros

  • Has a simple design and is easy to use and install
  • Does not take up a lot of space and is stable

Cons

  • Does not have a lot of functions or features

Buying Guide

  • Step 1:

The first step in choosing which Jon boat seats and mounts to buy is to identify the type of seat you would like to use. We covered some of the common types used on Jon boats above. We discounted certain types such as bench seats since they are too long, and lounge seats because they take up too much space. Those covered are ones we consider practical for use on Jon boats.

  • Step 2:

After identifying which type you’d like, it’s time to choose which seat mount to use. You can choose later if you’re worried about compatibility with your chosen boat seat, but going with a base that uses the standard mounting system is a good bet since most boat seats will work with it.

  • Step 3:

Next, we choose the boat seat, but we’ll consider two things. First is its marine-proofing. Any boat seat needs to be fit for use on the water, but not all boats have the same level of marine-proofing.

Some boats are waterproof, while others are just water-resistant. But what’s the difference? Waterproof means water is not getting into the seat material. Water-resistant means it will be hard for water to get in there, but it will get there if it soaks long enough.

But why settle for water-resistant then? Waterproof material can cause limitations to other aspects of the boat seat—decorations, for instance. The feeling of the material can also come into play. Waterproof material might be smooth and tough like plastic and may not be as comfortable as vinyl seats which are just water-resistant.

The second point to consider is the level of comfort and the form this comfort takes. Simply put, this means you should consider how comfortable you want your boat seat to be. Does it have to have a backrest? Does it need to have padding? You should think of the finer details you’d like to have in your boat seat at this point.

It would also be good to consider if you need Jon boat bench seat cushions as well as compatibility with an aluminum boat seat box base.

  • Step 4:

After answering those critical questions in Step 3, it’s time to look at boat seats. But the next matter for consideration is the price point. High-quality seats can go all the way up to the thousands. But since this seat is for a Jon boat, you should be more practical, or at least it feels right to be more practical, and cheap Jon boat seats will do.

  • Step 5:

After putting all those ideas together, you should have a good idea of which ideal Jon boat seats to go with. Good luck.

Who Makes The Best Jon Boat Seat

jon-boat-swivel-seats

There is no one company with the best boat seats, so instead, we’ll focus on makers with notable products on our list.

Millennium Marine has an interesting lineup of boat seats that use a breathable fabric that is both durable and keeps dry well. NORTHCAPTAIN-made boat seats boast a premium finish and high-quality Jonboat seats.

Leader Accessories also have quality boat seats that look good and offer comfortable seating.

How Do You Remove The Seat From A Jon Boat

Jon boat seats are removed from the install base on a Jon boat. Most use standard bolt mounting and remove 4 or 5 mounting bolts below the seat base.

Some use a removable platform with a seat clamp to make the removal of seats even easier.

How Do You Mount A Seat On A Jon Boat

Jon boat seats are mounted on install bases for pedestals, swivels, or even sliding platforms. It is as simple as screwing the seat base to a mounting platform for mounting seats using standard bolting mounts.

Conclusion

This marks the end of our small guide for choosing the best Jon boat seats. Hopefully, you’ll have found the boat seat that offers the right combination of function and comfort that matches your needs.

Once you settle your Jon boat seat needs, you’re all set but make sure you take enough time to decide. Happy shopping.

5/5 - (4 votes)